BD 12/12 M6 0,76kW

FAN DOUBLE INLET

MANUFACTURING FEATURES:
• Galvanised steel sheet housing.
• Polyamide impeller reinforced with fibreglass in models 7/7, 9/9, 10/10 and 12/12. The impeller of the rest of models are made of galvanised steel sheet.
• Double inlet forward curved impeller in all models.
• Supplied with mounting feet (included in price). Except 15/15 which is a cubic model.
•Exclusive system Casals fixing motor and turbine fan by flexible arms silent blocks to avoid any vibration. Arms in compliance with ROHS regulations 2002/95 / EC (Restriction of Hazardous Substances in electrical and electronic equipment)
•Closed motors specially designed Casals: extruded aluminum housing, all protected inside the terminal box on the motor IP 65 protection and motor with IP54 protection and Class F insulation standard voltages: 230V 50Hz in single phase and 230/400V 50Hz three-phase.
• Single phase motors with controllable voltage speed. Three phase motors controllable using a frecuency speed controller

APPLICATIONS:
Designed for assembly in equipment:
• Ventilation boxes and air handling units.
• Centrifugal heaters.
• Industrial and professional kitchen hoods. Use in supply or extraction with prior fat filtering.
• Maximum working temperature: 50ºC for single phase motors and 60ºC for three phase motors.

UNDER REQUEST
• Impeller made of galvanized steel sheet.
• MBI assembled

Fan

Max flow

6280 m³/h

Weight

27 Kg

Motor

Power

0,76 kW

RPM Motor

950

Capacitor

30µF 400V

I max. 230 V

6,7

Size

STC90

Weight

11.15 Kg

Efficiency

70 %

0.96

BD 12/12 M6 0,76kW

Design point

Service point

Degrees

RPM

Temp. max. (ºC)

Q (m³/h)

Ps (Pa)

Pd (Pa)

Pt (Pa)

Speed air (m/s)

Security coefficient

Mechanical total efficiency (%)

Total efficiency (%)

Pw_mec

Pw_mec (kW)

Pw_abs (kW) 1.2 Kg/m³

Pw_recom (kW)

Alternative point

BD 12/12 M6 0,76kW

A	B màx	C	D	E	F	G	H	I	J	N	X
396	437	425	350	77	17	536	244	490	230	343,5	260

BD 12/12 M6 0,76kW

Model

REG 10A

Code

960710100

Information

MANUAL SINGLE PHASE SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for sinus wave speed control. Only available for single phase fans.
• Terminal wiring.
• Minimum speed adjustable and potentiometer speed control.
• Sealed box IP-54 box. Light switch pilot.
• EMC filter according to the En55014 Standard.

Model

INT 25 3P A

Code

INT253PA

Information

SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model

RI 12/12

Code

A-960000408

Information

OUTLET PROTECTION GUARD FOR FANS

MANUFACTURING FRATURES

• Galvanized protection grid on the outlet side to avoid the entry of objects and contact with the impeller.

Model

RA 12

Code

A-960670100

Information

INLET PROTECTION GUARD FOR CENTRIFUGAL FANS

MANUFACTURING FRATURES

• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of galvanised steel models 7,9, 10, 12 and 15. And the rest of models with polyester powder finishing coat.